Whats everybody running for mods?
+10
ceo1
islandboy78
lzykid4life
islander27
SCGGC8
Mmanni39
catgut
gummx97
tempest24
WRB04STi
14 posters
Page 1 of 3
Page 1 of 3 • 1, 2, 3
Whats everybody running for mods?
Power? Suspension? Interior? Exterior?
WRB04STi- Number of posts : 108
Age : 42
Location : With Crawford and FP Red
Registration date : 2008-12-03
Re: Whats everybody running for mods?
heeheehee.... subie is only 6months old! im stock-o!
my mod is a crazy driver...oh wait i am the driver!!!!
my mod is a crazy driver...oh wait i am the driver!!!!
Re: Whats everybody running for mods?
keeping mine stock as much as possible for higher resale value!!
gummx97- SCG Vice-President
- Number of posts : 549
Age : 57
Location : Guam, USA
Registration date : 2008-12-02
Re: Whats everybody running for mods?
Ecutek tuned at Topspeed - Doug Wilks
Stock block
FP Red 3" In 8cm out
Ultimate Racing upipe with Tial 44 EWG
Perrin 816cc injectors, walbro 255 fuel pump
Perrin Front Mount Intercooler
Blow-through charge pipe MAF set-up and Tial 50 bov welded pre-maf
Perrin inlet hose w/Perrin foam filter
TurboXS oil catch can with custom hoses
HKS downpipe, 3" Invidia N1
NGK 1 step colder plugs
A'pexi AVCR
ACT Street Clutch
Other stuff done to the car:
Optima Red top battery
JDM Pink springs and Group N hardened strut tops
Hawk HPS pads front and rear
Kartboy short shifter with front and rear bushings
Worx shift knob
Defi EGT (needs sensor), OIL temp and pressure gauges
Tein Hood dampers
Rear red tint overlays
Whiteline steering rack bushings
Carbon Fiber S203 Lip
Carbon Fiber Foglight Covers
S203 Wing
Hella horns
Enkei RPF-1's 18 x 8 with 235/40 tires
This car has dynoed 387whp on 93 19psi. It has run a best of 11.7 @ 115.8, 11.9 @ 118
Stock block
FP Red 3" In 8cm out
Ultimate Racing upipe with Tial 44 EWG
Perrin 816cc injectors, walbro 255 fuel pump
Perrin Front Mount Intercooler
Blow-through charge pipe MAF set-up and Tial 50 bov welded pre-maf
Perrin inlet hose w/Perrin foam filter
TurboXS oil catch can with custom hoses
HKS downpipe, 3" Invidia N1
NGK 1 step colder plugs
A'pexi AVCR
ACT Street Clutch
Other stuff done to the car:
Optima Red top battery
JDM Pink springs and Group N hardened strut tops
Hawk HPS pads front and rear
Kartboy short shifter with front and rear bushings
Worx shift knob
Defi EGT (needs sensor), OIL temp and pressure gauges
Tein Hood dampers
Rear red tint overlays
Whiteline steering rack bushings
Carbon Fiber S203 Lip
Carbon Fiber Foglight Covers
S203 Wing
Hella horns
Enkei RPF-1's 18 x 8 with 235/40 tires
This car has dynoed 387whp on 93 19psi. It has run a best of 11.7 @ 115.8, 11.9 @ 118
WRB04STi- Number of posts : 108
Age : 42
Location : With Crawford and FP Red
Registration date : 2008-12-03
Re: Whats everybody running for mods?
WRB04STi wrote:Ecutek tuned at Topspeed - Doug Wilks
Stock block
FP Red 3" In 8cm out
Ultimate Racing upipe with Tial 44 EWG
Perrin 816cc injectors, walbro 255 fuel pump
Perrin Front Mount Intercooler
Blow-through charge pipe MAF set-up and Tial 50 bov welded pre-maf
Perrin inlet hose w/Perrin foam filter
TurboXS oil catch can with custom hoses
HKS downpipe, 3" Invidia N1
NGK 1 step colder plugs
A'pexi AVCR
ACT Street Clutch
Other stuff done to the car:
Optima Red top battery
JDM Pink springs and Group N hardened strut tops
Hawk HPS pads front and rear
Kartboy short shifter with front and rear bushings
Worx shift knob
Defi EGT (needs sensor), OIL temp and pressure gauges
Tein Hood dampers
Rear red tint overlays
Whiteline steering rack bushings
Carbon Fiber S203 Lip
Carbon Fiber Foglight Covers
S203 Wing
Hella horns
Enkei RPF-1's 18 x 8 with 235/40 tires
This car has dynoed 387whp on 93 19psi. It has run a best of 11.7 @ 115.8, 11.9 @ 118
Nice! We have an FP Red on island! At first I was debating on either a green or smaller yet, an 18G for the sake of autox.
MODS
Currently stage 2:
CAI, dp, Perrin catback, Clark AP unrefined reflash.
Aiming for steering/suspension mods first. Currently have Cobb springs, RalliTek Front & rear sway bar kit <22mm and 19mm> HD front & rear links, & RalliTek polyurethane sway bar bushings. Dunlop Direzza Star Spec 225/45 for my oem wheels. Last but not least, a modified driver ;) oh & I forgot to mention LOCTITE
I'll work towards more power after brakes, clutch & front LSD but I want to have power delivery like an SR40 or a bit more with not too much lag on a large TMIC+meth and converted to an STi manifold.
J
Last edited by catgut on Wed Feb 11, 2009 12:43 am; edited 2 times in total
Re: Whats everybody running for mods?
I did have a DB 20G and cooked that. Next I need to build the block because Im pretty sure that I cracked a ringland. Then after that I want to get some DBA 4000's and lines, and do the sway bars and endlinks.
WRB04STi- Number of posts : 108
Age : 42
Location : With Crawford and FP Red
Registration date : 2008-12-03
Re: Whats everybody running for mods?
WRB04STi wrote:I did have a DB 20G and cooked that. Next I need to build the block because Im pretty sure that I cracked a ringland. Then after that I want to get some DBA 4000's and lines, and do the sway bars and endlinks.
Regretfully I just sold my FP 20G TD06 8cm and 850cc injectors for fear of too much lag for the autox short courses we have here. Now trying to sell my UR FMIC to free up some cash for another turbo & TMIC.
Too bad your ringland went, I was hoping to get a ride to get a better gauge on what I'll be in for with a larger turbo like the FP Red Good luck getting that block built....Crawford or your hand in it for a budget rebuild? I saw a few built blocks for sale on NASIOC some time ago, pretty sure Triple-B can get it here for under $200.00 from the west coast.
I've read and have recommendations from friends abroad that the SR40 comes on nice, lots of power under the curve, spools like an 18G, pulls to redline like a mutha, and is built like a tank.....sounds like my kind of turbo to double duty in autox & the occasional drag.
Come out to the next Subaru meet this Sunday, with or without your WRB04STi!
Jesse
Re: Whats everybody running for mods?
catgut wrote:WRB04STi wrote:I did have a DB 20G and cooked that. Next I need to build the block because Im pretty sure that I cracked a ringland. Then after that I want to get some DBA 4000's and lines, and do the sway bars and endlinks.
Regretfully I just sold my FP 20G TD06 8cm and 850cc injectors for fear of too much lag for the autox short courses we have here. Now trying to sell my UR FMIC to free up some cash for another turbo & TMIC.
Too bad your ringland went, I was hoping to get a ride to get a better gauge on what I'll be in for with a larger turbo like the FP Red Good luck getting that block built....Crawford or your hand in it for a budget rebuild? I saw a few built blocks for sale on NASIOC some time ago, pretty sure Triple-B can get it here for under $200.00 from the west coast.
I've read and have recommendations from friends abroad that the SR40 comes on nice, lots of power under the curve, spools like an 18G, pulls to redline like a mutha, and is built like a tank.....sounds like my kind of turbo to double duty in autox & the occasional drag.
Come out to the next Subaru meet this Sunday, with or without your WRB04STi!
Jesse
I really liked the 20G it did pull nicely! But after I blew it came across a deal I couldnt pass up with the Red so I got it. I might have my boys at IAG build me a nice block and have it sent over but, that probably wont happen for a while because I deploy in Jan. Ill have to see how things are going and I may have to come out for that.
WRB04STi- Number of posts : 108
Age : 42
Location : With Crawford and FP Red
Registration date : 2008-12-03
Re: Whats everybody running for mods?
GuamSTI wrote:Wow thats a lot of mods. I just want an accessport and thats it.
come on jay, ya have lots of parts too!!! hahahaha, ya cant pretend to be a sleeper car no more by running the fastest times at autox everything ya come out to play!!!
hahahaha... now I just want to get an accessport 1st...
Re: Whats everybody running for mods?
tempest24 wrote:GuamSTI wrote:Wow thats a lot of mods. I just want an accessport and thats it.
come on jay, ya have lots of parts too!!! hahahaha, ya cant pretend to be a sleeper car no more by running the fastest times at autox everything ya come out to play!!!
hahahaha... now I just want to get an accessport 1st...
this was a big GOTCHA on jay's mods!!
gummx97- SCG Vice-President
- Number of posts : 549
Age : 57
Location : Guam, USA
Registration date : 2008-12-02
Tiffany's goodies (wife named the car when I first got it)
Cobb Accessport Stage II
Stock Block
GP Moto Intake Elbow
Perrin MBC
Perrin Panel Filter
Perrin Afta-MAF Hose
Perrin Downpipe Front section
Perrin Downpipe Rear section
Top Fuel Power Exhaust CB
NGK 1 Step Colder Plugs
Bling Bling
Carbign Craft Carbon Fiber Alternator Cover
Password: Red JDM fender washers
STi Oil Cap
STi Radiator Caps
STi Tie down Battery Strap
Perrin Front Strut Brace
EBC Red Stuff brake pads Front & Rear
EBC Rotors Front & Rear
Golden Apple Nex 4 way adjustable coilovers
Golden Apple Sterns Beast 18x8
Nitto NT 555 235/40
Hopefully Santa brings me more this year I have been a really good boy! lol
Good stuff Jesse and Pete!
Stock Block
GP Moto Intake Elbow
Perrin MBC
Perrin Panel Filter
Perrin Afta-MAF Hose
Perrin Downpipe Front section
Perrin Downpipe Rear section
Top Fuel Power Exhaust CB
NGK 1 Step Colder Plugs
Bling Bling
Carbign Craft Carbon Fiber Alternator Cover
Password: Red JDM fender washers
STi Oil Cap
STi Radiator Caps
STi Tie down Battery Strap
Perrin Front Strut Brace
EBC Red Stuff brake pads Front & Rear
EBC Rotors Front & Rear
Golden Apple Nex 4 way adjustable coilovers
Golden Apple Sterns Beast 18x8
Nitto NT 555 235/40
Hopefully Santa brings me more this year I have been a really good boy! lol
Good stuff Jesse and Pete!
Mmanni39- Number of posts : 186
Age : 45
Location : Guam
Registration date : 2008-12-02
Re: Whats everybody running for mods?
wow...never realized how subarus can become a huge money pit via mods, not to mention gas mileage and prices.
gummx97- SCG Vice-President
- Number of posts : 549
Age : 57
Location : Guam, USA
Registration date : 2008-12-02
Re: Whats everybody running for mods?
or if you dont want to let me know how much you want for them
WRB04STi- Number of posts : 108
Age : 42
Location : With Crawford and FP Red
Registration date : 2008-12-03
running for mods?
Exterior
JDM headlights
17" Oz Gold Superleggera
Interior
5 Blue led
Custom leather car seat cover
Suspension
Ground control coilovers
Engine/ Performance
Stock Or Is IT?
JDM headlights
17" Oz Gold Superleggera
Interior
5 Blue led
Custom leather car seat cover
Suspension
Ground control coilovers
Engine/ Performance
Stock Or Is IT?
Re: Whats everybody running for mods?
OBP WRX 07
Stage II
Cobb AP V2
OTS Stage II map
Invidia catted DP
Invidia N1 resonated cat back exhaust
K&N drop in filter
17x8 Enkei RPF1
245/40/17 Kumho ASX
Tein S-Tech Springs
04/05 Tail lights
STI limited front lip underspoiler
Stage II
Cobb AP V2
OTS Stage II map
Invidia catted DP
Invidia N1 resonated cat back exhaust
K&N drop in filter
17x8 Enkei RPF1
245/40/17 Kumho ASX
Tein S-Tech Springs
04/05 Tail lights
STI limited front lip underspoiler
islander27- Number of posts : 61
Age : 38
Location : Dededo, GU
Registration date : 2008-12-16
Re: Whats everybody running for mods?
islander27 wrote:OBP WRX 07
Stage II
Cobb AP V2
OTS Stage II map
Invidia catted DP
Invidia N1 resonated cat back exhaust
K&N drop in filter
17x8 Enkei RPF1
245/40/17 Kumho ASX
Tein S-Tech Springs
04/05 Tail lights
STI limited front lip underspoiler
Man that is one awesome Invidia DB and CB......
Mmanni39- Number of posts : 186
Age : 45
Location : Guam
Registration date : 2008-12-02
Re: Whats everybody running for mods?
Mmanni39 wrote:Cobb Accessport Stage II
Stock Block
GP Moto Intake Elbow
Perrin MBC
Perrin Panel Filter
Perrin Afta-MAF Hose
Perrin Downpipe Front section
Perrin Downpipe Rear section
Top Fuel Power Exhaust CB
NGK 1 Step Colder Plugs
Bling Bling
Carbign Craft Carbon Fiber Alternator Cover
Password: Red JDM fender washers
STi Oil Cap
STi Radiator Caps
STi Tie down Battery Strap
Perrin Front Strut Brace
EBC Red Stuff brake pads Front & Rear
EBC Rotors Front & Rear
Golden Apple Nex 4 way adjustable coilovers
Golden Apple Sterns Beast 18x8
Nitto NT 555 235/40
Hopefully Santa brings me more this year I have been a really good boy! lol
Good stuff Jesse and Pete!
You spent some serious Money!!!!! Man, I wish my mod budget was 1/2 yours I can't even begin to imagine how much Pete spent on his AWD monster!
All I can say Brian is that's money well spent and the combination works I just want some more suspension & steering mods, a radical alignment, front - center - rear LSDs, and a VF-39 and I'll be a happy camper at the autox!
Re: Whats everybody running for mods?
06 wrx wagon
originally obp..now pure white
Red line fluid where possible
Avo catted dp
Fujitsubo power getter cat back
Perrin charge pipe/sti drop in filter/custom intake ducting aha
Helix coilovers
Camber bolts front and rear/fenders slightly pulled
Whiteline front roll center kit
Perrin rsb adj 24mm/perrin endlinks/perrin rsb mounts
Axxis ultimate pads F/R/Goodrich stainless steel lines/super blue brake fluid
Roof rail deletes
V7 replica lip
Bride Zeta3/low max seat rail
track: Volk te37 17x8 225/40 avon tech Rs
daily: Rota torque Rs 17x9 235/45 g-force ta
Will update if I remember any thing else ahah..
originally obp..now pure white
Red line fluid where possible
Avo catted dp
Fujitsubo power getter cat back
Perrin charge pipe/sti drop in filter/custom intake ducting aha
Helix coilovers
Camber bolts front and rear/fenders slightly pulled
Whiteline front roll center kit
Perrin rsb adj 24mm/perrin endlinks/perrin rsb mounts
Axxis ultimate pads F/R/Goodrich stainless steel lines/super blue brake fluid
Roof rail deletes
V7 replica lip
Bride Zeta3/low max seat rail
track: Volk te37 17x8 225/40 avon tech Rs
daily: Rota torque Rs 17x9 235/45 g-force ta
Will update if I remember any thing else ahah..
lzykid4life- Number of posts : 1
Age : 37
Location : Sacramento
Registration date : 2009-01-26
My: 05 STI Modlist
Engine: Built EJ257
-CP Piston 100mm .20 overbore
-Modified Stock crank oil passage
-1mm Supertech valves
-Brian Crower Spring and retainers
-Cosworth Cams
-ARP Headstuds
-Cosworth Bearing Main/Rod
-PnP Intake Manifold Grimmspeed
-PnP TGV Deletes Grimmspeed
-8mm Phenolic Spacers
-NGK One step Colder Plugs
-Perrin equal Lentgh Headers
-Grimmspeed upipe with Tial 38mm EWG
-Invidia V2 Downpipe
-Greddy Evo 2 Catback
-DOM 3(3in inlet) turbo
-860cc injectors
-255 Walbro fuel pump
-SMC Alky Kit
-Crucial Racing Thermostat
-Koyo Radiator
-Full Samco Blue hose
-TurboXS FMIC
-TurboXS Utec
-TurboXS DTEC w/speed density
-ACT Street light clutch/flywheel
-Cobb Legacy Short Ram Intake
-Cusco Catch Can
-Kakumei Hood dampers
-cusco Heat Shield
-Greddy radiator shroud
Suspension
-Cusco zero 2E Coil overs
-Cusco 3 way adjustable rear sway bar
-cusco rear/front strut bar
-Perrin rear End links
-Replica H-brace
-Group N motormount
-Agency Power trans bone
-Kartboy Short shifter with front and rear bushings
Interior
-Defi 52mm amber(Boost, EGT, Oil Pressure)
-Kenwood doubledin
-Knocklite
Exterior:
-Make a sleeper WRX
-Powdercoated Black EVO MR BBS
Getting tuned as we speak will keep everyone updated so far making 336hp/352tq at 15psi at 92Oct. Cant wait to start spraying. Will be posting up pics shortly.
-CP Piston 100mm .20 overbore
-Modified Stock crank oil passage
-1mm Supertech valves
-Brian Crower Spring and retainers
-Cosworth Cams
-ARP Headstuds
-Cosworth Bearing Main/Rod
-PnP Intake Manifold Grimmspeed
-PnP TGV Deletes Grimmspeed
-8mm Phenolic Spacers
-NGK One step Colder Plugs
-Perrin equal Lentgh Headers
-Grimmspeed upipe with Tial 38mm EWG
-Invidia V2 Downpipe
-Greddy Evo 2 Catback
-DOM 3(3in inlet) turbo
-860cc injectors
-255 Walbro fuel pump
-SMC Alky Kit
-Crucial Racing Thermostat
-Koyo Radiator
-Full Samco Blue hose
-TurboXS FMIC
-TurboXS Utec
-TurboXS DTEC w/speed density
-ACT Street light clutch/flywheel
-Cobb Legacy Short Ram Intake
-Cusco Catch Can
-Kakumei Hood dampers
-cusco Heat Shield
-Greddy radiator shroud
Suspension
-Cusco zero 2E Coil overs
-Cusco 3 way adjustable rear sway bar
-cusco rear/front strut bar
-Perrin rear End links
-Replica H-brace
-Group N motormount
-Agency Power trans bone
-Kartboy Short shifter with front and rear bushings
Interior
-Defi 52mm amber(Boost, EGT, Oil Pressure)
-Kenwood doubledin
-Knocklite
Exterior:
-Make a sleeper WRX
-Powdercoated Black EVO MR BBS
Getting tuned as we speak will keep everyone updated so far making 336hp/352tq at 15psi at 92Oct. Cant wait to start spraying. Will be posting up pics shortly.
islandboy78- Number of posts : 7
Registration date : 2009-01-27
Re: Whats everybody running for mods?
very nice fellas.......nice to see the part list in everyone's Subie
Mmanni39- Number of posts : 186
Age : 45
Location : Guam
Registration date : 2008-12-02
Re: Whats everybody running for mods?
So far i'm just running a lead right foot ==> "It's what makes a Subaru a Subaru!"
ceo1- SCG Treasurer/Coordinator & Plans
- Number of posts : 323
Age : 41
Registration date : 2008-12-05
Re: Whats everybody running for mods?
ceo1 wrote:So far i'm just running a lead right foot ==> "It's what makes a Subaru a Subaru!"
So, Patrick Swayze, did you opt for the 5-lbs. or the 10-lbs. lead right foot option? Just curious In case you didn't notice, Night Rider opted for the light-weight reclining racing package. Sonny opted for the BIG GUN exhaust package as you can see. I'm just in my good 'ol reliable 308 which Higgins busts my nuts about everytime I wreck it
Selleck, OUT!
Re: Whats everybody running for mods?
GuamSTI wrote:Wow nobody has put anything on since we started this thread? I don't think this is accurate.
Yeah youre right because when I get back form the desert alot of mine will be changing!!!!
WRB04STi- Number of posts : 108
Age : 42
Location : With Crawford and FP Red
Registration date : 2008-12-03
Page 1 of 3 • 1, 2, 3
Page 1 of 3
Permissions in this forum:
You cannot reply to topics in this forum
|
|